manualshive.com logo in svg

York YCRJ45E00, Установка, эксплуатация и обслуживание

Поделиться
Скачать
York YCRJ45E00 Скачать руководство пользователя страница 76

76

YORK INTERNATIONAL

This message informs the operator whether the revers-

ing fan is active on SYS 1. This does not apply to YCW

and YCR chillers.

This message informs the operator whether the Hot Gas

Solenoid is ON or OFF. The micro will activate the Hot

Gas signal regardless of whether or not this option is

installed.

The Run Time for SYS 1 since the last start is displayed.

“OFF”: Sys 2 Liquid Line Solenoid De-energized

(Closed).

“ON”: Sys 2 Liquid Line Solenoid Energized (Open).

This message informs the operator of the number of

stages of loading which are active on SYS 2.

This message informs the operator of the number of for-

ward running fans which are active on SYS 2. This does

not apply to YCW and YCR chillers.

This message informs the operator whether the revers-

ing fan is active on SYS 2. This does not apply to YCW

and YCR chillers.

This message informs the operator whether the Hot Gas

Solenoid is ON or OFF. The Micro will activate the Hot

Gas signal regardless of whether or not this option is

installed.

LOCAL DISPLAY READOUT

Oper Data

The OPER DATA key also allows the user to scroll through

additional real time display information about the chiller

system which is not available from the DISPLAY keys.

This information covers a wide range of data which in-

cludes fan status, loading status, liquid line solenoid

status, run time, etc. A total of 20 different displays are

offered.

NOTE: Some of the information that may be recovered

(i.e. fan operation, discharge pressures, stages

of loading, etc.) may not apply to the chiller.

The micro is capable of operating these items

and displaying information relating to them re-

gardless of whether they are present on the chiller.

When the OPER DATA key is pressed, the following

message will appear: 

NOTE: Depending upon the

EPROM installed, the sequence of messages may

vary.

Repetitively pressing the ENTER key allows the opera-

tor to scroll through the 20 available displays.

In the information that follows, a sample message along

with an explanation of its meaning is provided for all 20

messages.

“OFF”: SYS 1 Liquid Line Solenoid De-energized

(Closed).

“ON”: SYS 1 Liquid Line Solenoid Energized (Open).

This message informs the operator of the number of

stages of loading which are active on SYS 1.

This message informs the operator of the number of for-

ward running fans which are active on SYS 1. This does

not apply to YCW and YCR chillers.

P R E S S

E N T E R

T O

D I S P L A Y

D A T A

S Y S

1

L I Q U I D

L I N E

S O L E N O I D

S T A T U S

O F F

S Y S

1

S T A G E S

O F

L O A D I N G

2

S Y S

1

F O R W A R D

F A N S

S T A T U S

S Y S

1

R E V E R S E

F A N

S T A T U S

O F F

S Y S

1

H O T

G A S

B Y P A S S

V A L V E

S T A T U S

O F F

S Y S

1

R U N

T I M E

2 0 0

S E C S

S Y S

2

L I Q U I D

L I N E

S O L E N O I D

S T A T U S

O N

S Y S

2

S T A G E S

O F

L O A D I N G

1

S Y S

2

F O R W A R D

F A N S

S T A T U S

O F F

S Y S

2

R E V E R S E

F A N

S T A T U S

O F F

S Y S

2

H O T

G A S

B Y P A S S

V A L V E

S T A T U S

O N

Содержание YCRJ45E00









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды