manualshive.com logo in svg

YOKOGAWA WT5000, Руководство пользователя

Поделиться
Скачать
YOKOGAWA WT5000 Скачать руководство пользователя страница 2

i

IM WT5000-02EN

List of Manuals

Thank you for purchasing the WT5000 Precision Power Analyzer. This User’s Manual explains how to 
use the WT5000. To ensure correct use, please read this manual thoroughly before operation.
After reading this manual, keep it in a safe place.  The following manuals, including this one, are 
provided as manuals for the WT5000. Please read all manuals.

Manual Title

Manual No.

Description

WT5000 

Precision Power Analyzer 

Features Guide

IM WT5000-01EN

The supplied CD contains the PDF file of this manual. 

This manual explains all the instrument’s features other 

than the communication interface features.

WT5000 

Precision Power Analyzer 

User’s Manual

IM WT5000-02EN

This document. The supplied CD contains the PDF file 

of this manual. The manual explains how to operate 

this instrument.

WT5000 

Precision Power Analyzer 

Getting Started Guide

IM WT5000-03EN

This guide explains the handling precautions and basic 

operations of this instrument.

WT5000 

Precision Power Analyzer 

Communication Interface 

User’s Manual

IM WT5000-17EN

The supplied CD contains the PDF file of this manual. 

The manual explains the instrument’s communication 

interface features and instructions on how to use them.

Model WT5000 

Precision Power Analyzer

IM WT5000-92Z1

Document for China

The “EN” and “Z1” in the manual numbers are the language codes.

Contact information of Yokogawa offices worldwide is provided on the following sheet.

Document No.

Description

PIM 113-01Z2

List of worldwide contacts

Notes

•  The contents of this manual are subject to change without prior notice as a result of continuing 

improvements to the instrument’s performance and functions. The figures given in this manual may 
differ from those that actually appear on your screen.

•  Every effort has been made in the preparation of this manual to ensure the accuracy of its 

contents. However, should you have any questions or find any errors, please contact your nearest 
YOKOGAWA dealer.

•  Copying or reproducing all or any part of the contents of this manual without the permission of 

YOKOGAWA is strictly prohibited.

•  The TCP/IP software of this product and the documents concerning it have been developed/created 

by YOKOGAWA based on the BSD Networking Software, Release 1 that has been licensed from 
the Regents of the University of California.

Trademarks

•  Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the 

United States and/or other countries.

•  Adobe and Acrobat are either registered trademarks or trademarks of Adobe Systems Incorporated.
•  In this manual, the ® and TM symbols do not accompany their respective registered trademark or 

trademark names.

•  Other company and product names are trademarks or registered trademarks of their respective 

holders.

Revisions

•  1st Edition:   September 2018
•  2nd Edition:  January 2020
•  3rd Edition:  February 2021
•  4th Edition:   September 2021

4th Edition: September 2021 (YMI)

All Rights Reserved, Copyright © 2018 Yokogawa Test & Measurement Corporation

 

Содержание WT5000










































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды