YOKOGAWA TB820D Скачать руководство пользователя страница 8

Страница: 8 / 87

<1. OVERVIEW>

1-1

IM 12E01B30-02EN 2nd Edition : June 09 , 2021-00

1. OVERVIEW

To keep good quality in industrial or drinking water and rivers or streams, “Turbidity” is one of the

important measurement parameters to control water quality.
Turbidity analyzer is more than ever demanded not only for water treatment, but currently for

measurement/detection of suspended substances in industrial waste or of turbidity at chemical

processing facility.
Since their sales began in 1959, Yokogawa turbidimeters have been continuously developed and

improved using various measurement principles suited for various applications. With its many

achievements, Yokogawa has earned its customers’ confidence. Right Angle Scattered Light

Turbidity Analyzer, composed of Turbidity Detector TB820D and Liquid Analyzer FLXA402T, is

a next-generation analyzer, developed based on years of experience, combining the reliable

measurement principle with our latest digital sensor technology realizing high efficiency in facility

operations.
FLXA402T is a converter designed, being tailored from the well-received FLXA402, to provide

multiple detector measurements. In addition to conventional analog output, Modbus TCP,

Modbus RTU/RS485 are available.
The technology of predictive maintenance prevents accidental shutdown of the factory and

reduces OPEX. TB820D has drastically improved maintainability and minimized maintenance

time.

1.1

Measurement system and structure

TB820D is used with FLXA402T Liquid Analyzer for Turbidity and Chlorine. TB820D also can be

used with a sampling system to control the pressure or flow rate of samples.

TB820D Right Angle Scattered Light Turbidity Detector

TB820D measures turbidity. The Detection unit consists of the following three parts.

● Flow cell:

Sample flows through it.

● Detection unit:

Optical system incorporating Light source and Receiver

● Smart unit:

Memory of parameters, the control unit

FLXA402T Liquid Analyzer for Turbidity and Chlorine (converter)

The FLXA402T Liquid Analyzer for Turbidity and Chlorine output/displays measurement or status

of connected detectors.
Refer to

IM 12A01G01-03EN

for the setup of the display, input/output, or communication.

Sampling System

Sample introduced into TB820D needs to be free from air bubbles by using a Head tank to

stabilize the pressure in piping and the flow rate. Use the sampling system if necessary.

Содержание TB820D
























































































Результаты поиска

Содержание TB820D

Отзывы:

YOKOGAWA TB820D, Руководство пользователя, Страница: 8 / 87

Результаты поиска

Содержание TB820D

Отзывы: