YOKOGAWA SL1000 Скачать руководство пользователя страница 6

Страница: 6 / 107

IM 720120-01E

Standard Accessories

The standard accessories below are supplied with the instrument. Check that all contents
are present and undamaged.

Model

Part Number

Qty. Specifications

Power cord

A1006WD

UL/CSA Standard power cord

Maximum rated voltage: 125 V, Maximum rated current: 7 A

A1009WD

VDE Standard Power Cord

Maximum rated voltage: 250 V, Maximum rated current: 10 A

A1054WD

BS Standard Power Cord

Maximum rated voltage: 250 V, Maximum rated current: 10 A

A1024WD

AS Standard Power Cord

Maximum rated voltage: 250 V, Maximum rated current: 10 A

A1064WD

GB Standard Power Cord

Maximum rated voltage: 250 V, Maximum rated current: 10 A

Acquisition Software (CD)

B8073ZA

Acquisition software used to configure and control the SL1000.

Soft case

B8081HG

For storing accessories.

Cover panels

B8073CY

For protecting empty module slots.

Rubber feet

A9088ZM

Two rubber feet in one set.

Manuals

IM 720120-01E 1

High-Speed Data Acquisition Unit User’s Manual (this manual)

IM 720120-61E 1

Acquisition Software User’s Manual

IM 720120-51E 1

Input Module User’s Manual

IM 701250-04E 1

Precautions Concerning the Modules

IM 701992-02E 1

Xviewer Install Manual

IM 720120-92

User’s Manual for China

PIM 113-01Z2

List of worldwide contacts

Standard accessories are not covered by warranty of this instrument.

Manuals

Acquisition

Software

B8073ZA (CD)

Soft case

B8081HG

Cover panels

B8073CY 8 pieces

Rubber feet

A9088ZM

UL/CSA Standard

A1006WD

VDE Standard

A1009WD

BS Standard

A1054WD

AS Standard

A1024WD

Power Cord

(one of the following power cords is

supplied according to the instrument

’

s suffix codes)

GB Standard

A1064WD

1 Make sure that the attached power cord meets the designated standards of the country and area

that you are using it in.

2 The CD includes 1 license for the Xviewer Standard Edition in addition to the SL1000 Acquisition

Software.

  The /XV1 option includes 1 license for the Xviewer MATH Edition.
  The /XV0 option does not include a license for Xviewer.
3  Not included with the /XV0 option.

Checking the Contents of the Package

Содержание SL1000












































































































Результаты поиска

Содержание SL1000

Отзывы:

YOKOGAWA SL1000, Руководство пользователя, Страница: 6 / 107

Результаты поиска

Содержание SL1000

Отзывы: