YOKOGAWA FN510, Руководство пользователя

Страница: 61 / 67

<9. Connection Device Type>
9-14
IM 01W03D02-01EN
Object ID Attribute
ID
Label Description Default value Handling
* 1
1.
UAPMO
block
(continued)
147 Faults Sensor or
Actuator Alert
The On/Off or priority for Faults Sensor or Actuator
Alert can be set.
1. On/Off setting
0: On, 255: Off (default)
2. Alert report priority: 0 to 15 (default: 15)
1. Off
2. 15
W(P)
148 Faults
Electronics Alert
The On/Off or priority for Faults Electronics Alert
can be set.
1. On/Off setting
0: On, 255: Off (default)
2. Alert report priority: 0 to 15 (default: 15)
1. Off
2. 15
W(P)
2.
UDO
block
2 DESCRIPTION Indicates the version and model information of the
downloaded data.
--- R
3 STATE Indicates the status of UAP block.
0: Idle
1: Downloading
3: Applying
4: DL Complete
6: DL Error
--- R
5 MAX_BLOCK_
SIZE
Maximum block size. This value is smaller than the
maximum data size of APDU.
--- R
14 LAST_BLOCK_
DOWNLOADED
Indicates the last downloaded block number. 0
means that no block has been downloaded.
--- R
16 ERROR_CODE Indicates the error codes for DL Error.
0: no Error
1: Timeout
2: Client Abort
64: Apply failure
--- R
3.
CO
block
1 REVISION Indicates the revision number such as COMM_
ENDPOINT, etc.
--- R
2 COMM_
ENDPOINT
Indicates the Endpoint information. The following
shows the components.
1. Network address of remote endpoint
2. Transport layer port at remote endpoint
3. Object ID at remote endpoint
4. Stale data limit
5. Data publication period
6. Ideal publication phase
7. Publish Auto Retransmit
8. Configuration status
--- W
3 COMM_
CONTRACT
Indicates the Contract information. The following
shows the components.
1. ContractID
2. Contract_Status
3. Actual_Phase
--- R
4 PUB_ITEM_
MAX
Maximum PUB_ITEM value. --- R
5 PUB_ITEM_
NUM
PUB_ITEM number. --- R
6 PUB_ITEM Indicates the PUB_ITEM information. The following
shows the components.
1. ObjectID
2. AttributeID
3. AttributeIndex
4. Size
--- W