YOKOGAWA DL9000 Series, Руководство пользователя

Страница: 200 / 539

Acquisition and Display
7-15
IM 701310-01E
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
App
Index
E-Mail Content
The e-mail content varies depending on the selected actions and GO/NO-GO conditions.
For information about e-mail content when Nogo is set as an action, see page 7-19.
• When All Condition Is Set as an Action
<Subject>: The subject of the e-mail. It may be labeled differently
depending on the e-mail software (as “title” for example). The
content of the subject is as follows:
All Condition Triggered Report (No.) or All Condition
Interval Report (No.).
The number in parentheses is the number of returned no-go
results.
[Comment]: Comments
[Trigger Date and Time]: The trigger date and time
[ACQ Count]:
The action count
Example of a Typical E-Mail
<Subject> All Condition Interval Report 2
-----------------------------------------------------------------Body
[Comment]
Sample-All Condition
[Trigger Date and Time] 2006/03/01 16:47:04
[ACQ Count]
1367
Note
Points to Consider When Setting the Action-on-Trigger Function
• You cannot change settings while the action-on-trigger function is active.
• Exponential averaging is used.
• When repetitive sampling mode is ON, the DL9000 performs GO/NO-GO determination on
each history waveform.
Points to Consider When Setting Save to File as an Action
• Do not set the storage medium’s root directory as the save destination.(The DL9000 can
only store 512 files to the root directory of a storage medium that it uses.)
• If you set sequential numbering as the automatic naming method (using the FILE menu),
as the number of saved files increases, the amount of time required to save a file will also
increase. Also, the maximum number of files that can be saved using sequential numbering
is 1000. To save more than 1000 files, set the automatic naming function to name files by
date.
• If you use the automatic naming function to save data to files, GO/NO-GO determination will
stop if the same file name exists in the same directory. To prevent this from happening, you
can either create a new empty directory before you start GO/NO-GO determination, or you
can make sure that there are no files in the destination directory.
• Up to 2500 files and directories can be displayed in the file list. If there are more than a total
of 2500 files and directories in a given directory, the file list for that directory will only display
2500 files and directories. There is no way to set which files and directories are displayed.
7.8 Setting the Action-On-Trigger Function