YOKOGAWA CQ1, Руководство пользователя, Страница: 228 / 268

5-132
<5. Functions of CQ1 Software>
IM 80J01A01-01E
Group Method Name Description
Labeling DivideEachRegion Attach the same label on adjacent axis
EndPointLabeling Attach label on endpoint of center line
JuncPointLabeling Attach label on junction point of center line
LineLabeling Attach label on center line
LabelTransform DilateRegion Dilate labeled region
ErodeRegion Erode labeled region
SubRegion Subtract labeled region
AndRegion Obtain cross union of labeled region
ExpandRegion3D Expand labeled region within the specified
range
OrExpandRegion3D Expand after obtaining the union of
labeled region and specified range
ExpandImage3D Expand labeled region within the specified
range gradually
OrExpandImage3D Expand after obtaining the union of
labeled region and specified range
gradually
FillUp Fill up holes of region
ExcludeEdge Exclude edge of region
SizeFilter Filter by size of region
DiameterFilter Filter by diameter of region
RoundnessFilter Filter by roundness of region
MeanIntensityFilter
Filter by mean intensity
※
of region
ROIFilter Filter by location of region
※
Note
“MeanIntensity” in this procedure contains background (about 100). It is different
from
“MeanIntensity” output as measurement value.
④
Removal of Image Processing Method
Click “-“ button to remove methods. Within “Binarization” and
“Labeling” groups, at least one method has to be selected, thus
the last one method cannot be removed.
If a method specified as
“Input” for succeeding method is removed,
the
“Input” of its referenced method will become “Lost Reference”
and cause error. To correct such error, it is necessary to re-specify
“Input”.
⑤
Moving Image Processing Method
Image Processing Method can be moved up and down by clicking
“
▼
” or “
▲
” buttons at the right side. However, moving a method
above
“Input” specified method also results in “Lost Reference “.
Removed Method
Delete
Reference
Reference