YOKOGAWA CQ1 Скачать руководство пользователя страница 222

Страница: 222 / 268

5-126

<5. Functions of CQ1 Software>

IM 80J01A01-01E

5.10

Trimming Parameter

(1) Trimmed image from center

Check to trim acquired images by following paremeter.

Trimmed area

isn’t displayed.

In case of tiling images with stitching (refer to page

5-64

), check

the box.

(2) X

Set the crosswise trimming ratio of images

(3) Y

Set the vertical trimming ratio of images

(4) Save as trimmed image

If checked, trimmed images are saved. If unchecked, images

without trimming is kept are saved.

In case of tiling images with stitching (refer to page

5-64

), uncheck

the box.

(5) OK

Close “Trimming Parameter” window with applying changes.

(6) Cancel

“Trimming Parameter” window without applying changes.

(1)

(2)

(3)

(4)

(5)

(6)

Note

In case that correction of “Chromatic Aberration” is available
in “Imaging” tab (refer to

5.4.3 Imaging Window

) and the box

is unchecked, blank space may occure in saved images.

Содержание CQ1













































































































































































































































































Результаты поиска

Содержание CQ1

Отзывы:

YOKOGAWA CQ1, Руководство пользователя, Страница: 222 / 268

Результаты поиска

Содержание CQ1

Отзывы: