2-28
IM AQ1210-01EN
Explanation
File Names and Comments
You can select up to 10 items to be used for file names. The items specified for fields
1
to
10
under
Name Type are displayed in order as a file name. The longest file name is 60 characters.
Item
Description
ID No.
Four digit number
The range is 0 to 9999. Four characters are assigned for the file name. For example, if
you set the number to “1,” “0001” will be used in the file name.
One character (tape number)
If you select to use the ID number for the file name, when Tape Number Type is set to
anything other than Off, the tape number is automatically appended to the ID number.
Example: If you have a combination of ID No. “0” and Tape Number Type “a to c (3),” the
file names will be set as follows: 0000a → 0000b → 0000c → 0001a → 0001b
→ 0001c.
Wavelength
Six characters containing the wavelength number and unit (Example: 1310 nm)
Comment
Up to 30 characters. However, because the entire file name must be within 60 characters,
you may not be able to set 30 characters.
Company name
You can select some of the label items. For details, see the table under “Label” later in
this section.
Name
Cable ID
Fiber ID
Cable Code
Start position
End position
• If the whole file name is longer than 60 characters, the excessive characters will be deleted.
• Blank cannot be specified for field
1
under Name Type.
• You cannot set duplicate items for Name Type.
Types of Characters and Strings Allowed in File and Folder Names
The following restrictions apply to the types of characters and strings allowed in file and folder
names.
• The following exact strings cannot be used due to MS-DOS limitations:
AUX, CON, PRN, NUL, CLOCK, CLOCK$, LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7,
LPT8, LPT9, COM0, COM1, COM2, COM3, COM4, COM5, COM6, COM7, COM8, COM9
• Of those characters on the keyboard that appears on the screen, the characters that can be used
are 0-9, A-Z, a-z, _, –, =, (, ), {, }, [, ], #, $, &, ~, !, `, and @.
@ cannot be entered consecutively.
• Keep the full path name (absolute path from the root folder) within 200 characters.
If this is exceeded, an error will occur when you perform file operations (save, copy, rename,
create folder, etc.).
Full path name: When you are operating a folder, it is the path up to the folder name.
When you are operating a file, it is the path up to the file name.
Saving Directly
• Setting the File Type
Set whether to make the measurement results to be saved into waveform data or a report.
*.SOR: Saved as waveform data
*.PDF: Saved in a report format
*.SOR+*.PDF: Both waveform data and report format are saved simultaneously.
• Setting the Save Operation
Set how to save the file when you save data.
Direct Save: A file name as assigned automatically according to the file name setup
conditions, and the file is saved.
Select ID: A file name as assigned automatically according to the file name setup conditions.
Then, you set a 2-digit ID to be appended to the file name. Finally, the file is saved.
2.4 File Conditions
