YOKOGAWA AQ1215A Скачать руководство пользователя страница 98

Страница: 98 / 282

5-5

IM AQ1210-01EN

Analyzing Events

App

Index

• Deleting an Event

Tap the

Rotary Knob

soft key to select Event.

Turn the

rotary knob

to select the event you want to delete.

Press the

Del.Event (Event)

soft key. The selected event is deleted.

The color of the selected event changes.

The event is deleted virtually. When the event

is deleted, the subsequent event numbers

are each decreased by one.

The deleted event is deleted from the event list.

Note

•  If only the S point and the E event are displayed, you cannot delete any events.
•  If you delete an event, the subsequent event numbers will all be reduced by one.
•  You cannot delete the S point.

5.1 Analyzing in TRACE Mode

Содержание AQ1215A



























































































































































































































































































Результаты поиска

Содержание AQ1215A

Отзывы:

YOKOGAWA AQ1215A, Руководство пользователя, Страница: 98 / 282

Результаты поиска

Содержание AQ1215A

Отзывы: