YOKOGAWA 800 plus Скачать руководство пользователя | Manualshive

Страница: 5 / 80

background image

5

4. RECEIVING & UPACKING

Your  meter  was  carefully  tested  and  inspected  prior  to  shipment.  Should  the  meter  be
damaged  in  shipment,  notify  the  freight  carrier  immediately.  In  the  event  the  meter  is  not
configured as ordered or the unit is inoperable, return it to the place of purchase for repair or
replacement.  Please include a detailed description of the problem.

5. SAFETY CONSIDERATIONS

Warning

: Use of this equipment in a manner other than specified may impair the pro-

tection of the device and subject the user to a hazard. Visually inspect the unit for signs of
damage. If the unit is damaged, do not attempt to operate.

Caution:

•

The unit must be connected to a Disconnect switch or a branch-circuit breaker, which must

be in a suitable location

•

This unit must be powered with AC (mains) from 85-264 Vac with the high voltage power

supply option, or 10-48 Vdc (12-32 Vac) with the low voltage power supply option. Verify
that the proper power option is installed for the power to be used. This meter has no AC
(mains) switch. It will be in operation as soon as power is connected.

•

The 85-264 Vac mains connector (P1 Pins 1-3) is colored Green to differentiate it from

other input and output connectors. The 12-32 Vac (10-48 Vdc) mains connector is colored
Black.

•

Do not make signal wiring changes or connections when power is applied to the instrument.

Make signal connections before power is applied. If reconnection is required, disconnect
the AC (mains) power before such wiring is attempted.

•

To prevent electrical or fire hazard, do not expose the instrument to excessive moisture.

•

Do not operate the instrument in the presence of flammable gases or fumes; such an

environment constitutes a definite safety hazard. This meter is designed to be mounted in a
metal panel or a bench or wall mount style case. The spacing around the meter and the
ventilation must be sufficient to maintain the ambient temperature at less than 55

°

C.

•

Verify the panel cutout dimensions, and mount according to instructions.

Symbols used

Caution (refer to accompanying documents)

Earth (ground) terminal.

Caution, risk of electric shock.

Both direct and alternating current.

Equipment protected throughout by double
insulation or reinforced insulation.

Operating environment:

The meter is Class II (double insulated) equipment designed for use in Pollution degree 2.

«
...
3
4
5
6
7
...
»

Содержание 800 plus

















































































Отзывы:

Нет отзывов

Похожие инструкции для 800 plus

Pasport PS-2117

Бренд: PASCO Страницы: 5

Бренд: JCM GLOBAL Страницы: 24

Бренд: Autonics Страницы: 4

Бренд: Casio Страницы: 55

Бренд: Casio Страницы: 96

Бренд: Casio Страницы: 112

Бренд: Casio Страницы: 110

Бренд: Olympia Страницы: 178

Бренд: Safescan Страницы: 15

FieldPoint FP-CTR-502

Бренд: National Instruments Страницы: 23

Бренд: Nautilus Hyosung Страницы: 47

Бренд: Veeder-Root Страницы: 4

Бренд: Sam4s Страницы: 83

Бренд: Velleman Страницы: 4

TEC MA-1040-400 Series

Бренд: TEC Страницы: 64

Бренд: icoms Страницы: 54

Бренд: JCM GLOBAL Страницы: 124

Hengstler tico 734

Бренд: impulse Automation Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды