PEM7D/C
1
VELLEMAN
PEM7D/C – COUNTER FOR MINI IR SECURITY SYSTEM PEM7D
1. Introduction
Thank you for buying the
PEM7D/C
4-digit counter! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, don't install or use it and contact your dealer. The counter should come
with this manual, a 10m connection cable and a mounting bracket with mounting screws.
2. Mounting
Fix the mounting bracket to the wall by means of the provided screws
(see figure on the right).
Then attach the
PEM7D/C
by sliding it downward over the bracket.
3. Connection
Connect the
PEM7D/C
to the
PEM7D
by plugging the
enclosed cable into the input of the
PEM7D/C
and the
output on the speaker of the
PEM7D
.
4. Use
Above the 4-digit display is a power LED that lights up when the
PEM7D/C
is correctly connected to the
PEM7D
.
Under the display are 3 buttons: "+" (to manually add 1 to the count), "-" (to manually subtract 1 from the count) and
"RESET" to reset the count to "0000". You can keep "+" or "-" pressed for more than 1 second for quick operation.
Hence, the
PEM7D/C
can also be used as a manual counter, but it has to be connected to the
PEM7D
in order to
receive power.
5. Specifications
Input voltage
9-15Vdc
Ambient temperature
-25°C~45°C
Dimensions (WxHxD)
58 x 67 x 24mm
Display
4 red digits
Current consumption
see table below
0000 48.7mA±10%
5555 44.7mA±10%
1111 30.7mA±10%
6666 18.7mA±10%
2222 44.7mA±10%
7777 36.0mA±10%
3333 44.7mA±10%
8888 52.7mA±10%
4444 40.5mA±10%
9999 48.7mA±10%
The information in this manual is subject to change without prior notice.
Dispose of this product in accordance with local and national disposal regulations.
Fig.1
Fig.2
