31
V2.3.0 OM-UNN valid from 15
th
April 2015
4.3
Final Report
After the analysis cycle is completed, the final report is displayed as shown in Fig. 4-5.
Fig.4-5 Final Report
The report consists of the following information:
Name of the test
Lot number of the cartridges
Cartridge No. in cartridge position of carousel ;
Expiry date of the cartridges
Sample /Calibrator/Quality Control Identification
Absorbance value
Concentration or index of the sample/calibrator/Quality Control
Reference Range
If the cycle has been started with ignoring sanitizing request by the instrument, a message will appear
between the heading and the titles of columns, and also in the printed text “This session was performed with
an un-sanitized instrument.”, indicating that the results of the session could have been affected by the state
of the fluidic path.
