Yealink Yealink SIP-T41P, Руководство по настройке

Страница: 57 / 91

Using Your Phone
49
Transfer On Conference Hang up
Transfer On Conference Hang up feature enables the IP phone to transfer the local
conference call to the other two parties after the conference initiator drops the
conference call.
To configure the transfer on conference hang up feature via the CommPortal phone
configurator:
1. Click on Features->Transfer.
2. Mark the desired radio box in the Transfer on Conference Hang up field.
- If you select Enabled, the other two parties remain connected when the
conference initiator drops the conference call.
- If you select Disabled, the conference ends.
3. Click Save changes to accept the change.
4. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to
Downloading
Configuration Files on page 7 .
You can use call park feature to park a call, and then retrieve the parked call from
another phone (for example, a phone in another office or conference room).
IP phone supports park call and enhanced park call. For park call feature, the server will
automatically hunt for the first available orbit in the call park orbits and parks the call
there. The call park orbits should be predefined, contact your system administrator for
more information. For enhanced park call feature, you have to specify a target orbit
where you want to park the call to.
You can park an active call by pressing the park call key or the enhanced call park key
(if configured) on the phone. If the call is parked successfully, you will hear a voice
prompt confirming that the call was parked.
You can retrieve the parked call by pressing a retrieve parked call key (if configured) or
dialing the retrieve access code followed by the orbit number (e.g., *302100).