Yealink T5 Series, Руководство администратора

Страница: 218 / 472

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
212
Permitted
Values
String within 32 characters
Default Blank
Web UI
Settings->Dial Plan->Block Out->BlockOut NumberX
[1]
Parameter
dialplan.block_out.line_id.X
[1]
<y0000000000xx>.cfg
Description
It configures the desired line to apply the block out rule. The digit 0 stands for all lines. If it is left blank,
the block out rule will apply to all lines on the IP phone.
Note : Multiple line IDs are separated by commas. It works only if “dialplan.digitmap.enable” and “accoun-
t.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Permitted
Values
0 to 16 (for T58V/T58A/T56A)
0, 1 (for CP960)
Default Blank
Web UI Settings->Dial Plan->Block Out->Account
[1]
X is from 1 to 10.
Example: Adding Replace Rules Using a Replace Rule File
The following example shows the configuration for adding replace rules.
Customize the replace rule template file and place this file to the provisioning server “http://192.168.10.25”.
Example
dialplan_replace_rule.url = http://192.168.10.25/DialPlan.xml
After provisioning, the rules defined in this file are added to the IP phone, and you can use the replace rules on the
phone.
Dial Plan Defined by Digit Map (New Dial Plan Mechanism)
Digit maps, described in RFC 3435 , are defined by a single string or a list of strings. If a number entered matches any
string of a digit map, the call is automatically placed. If a number entered matches no string - an impossible match -
you can specify the phone’s behavior. You can specify the digit map timeout, the period of time before the entered
number is dialed out.
Topics
Basic Regular Expression Syntax for Digit Map
Digit Map for All Lines Configuration
Digit Map for a Specific Line Configuration
Basic Regular Expression Syntax for Digit Map
You need to know the following basic regular expression syntax when creating a new dial plan:
T
The timer letter “T” indicates a timer expiry. If “T” is used alone (for example, 123T), the default timeout value of
3 will be used. If “T” is not used alone (for example, 123<Tx>, x can be a digit from 0 to 99), a complete match
occurs when waiting x seconds after inputting 123.