Yealink T5 Series, Руководство администратора

Страница: 409 / 472

Using CP960 Star Connection Feature
403
l
If you upgrade firmware via web user interface for the master phone, only the master phone will be upgraded. After
upgrading, the slave phones are disconnected from the master phone because of the different firmware version.
l
If you upgrade firmware via auto provisioning, both the master phone and slave phones will be upgraded.
Related Topic
CP960 Star Connection Feature Configuration
CP960 Star Connection Feature Configuration
The following table lists the parameters you can use to configure CP960 star connection feature.
Parameter features.cp_star_connection.master.enable <y0000000000xx>.cfg
Description It specifies whether or not the phone to be a master phone.
Permitted
Values
0 -Not a master phone
1 -master phone, the phone automatically generates a four-digit PIN number and sends broadcast. Users
do not need to manually create a star connection group on the phone.
Default 0
Phone UI Settings->Advanced Settings (default password: admin)->CP Star Connection->Create Group
Parameter
features.cp_star_connection.slave.X.mac
[1]
<y0000000000xx>.cfg
Description
It specifies the MAC address of a slave phone on the master phone.
After configured, the phone with this MAC address is authorized to connect with the master phone.
Example :
features.cp_star_connection.slave.1.mac = 805EC0092F4B
Note that the MAC address is case insensitive, and the following format of the MAC address is invalid:
80:5E:C0:09:2F:4B.
Note : It works only if “features.cp_star_connection.master.enable” is set to 1 (Enabled).
Permitted
Values
MAC Address
Default Blank
Parameter
features.cp_star_connection.master.mac
[2]
<y0000000000xx>.cfg
Description
It specifies the MAC address of master phone on the slave phones.
After configured, the phones can join the star connection group created by the master phone with this
MAC address.
Example :
features.cp_star_connection.master.mac=805EC0092F33
Note that the MAC address is case insensitive, and the following format of the MAC address is invalid:
80:5E:C0:09:2F:4B.
Note : It works only if “features.cp_star_connection.master.enable” is set to 0 (Disabled), and the phone is
authorized by the master phone to connect with it.
Permitted
MAC Address