Yealink T5 Series Скачать руководство пользователя

Страница: 55 / 472

Phone Network

Web UI

Network->Advanced->802.1x->Device Certificates

Parameter

static.network.802_1x.proxy_eap_logoff.enable

[1]

<y0000000000xx>.cfg

Description

It enables or disables the 802.1x-logoff feature for the PC port.

Note

: It is not applicable to CP960 phones.

Permitted

Values

-Disabled

-Enabled, the 802.1x logoff message is sent to the authenticator when the PC is disconnected.

Default

[1]

If you change this parameter, the phone will reboot to make the change take effect.

TR-069 Device Management

TR-069 is a technical specification defined by the Broadband Forum, which defines a mechanism that encompasses

secure auto-configuration of a CPE (Customer-Premises Equipment), and incorporates other CPE management func-

tions into a common framework. TR-069 uses common transport mechanisms (HTTP and HTTPS) for communication

between CPE and ACS (Auto Configuration Servers). The HTTP(S) messages contain XML-RPC methods defined in the

standard for configuration and management of the CPE.

For more information on TR-069, refer to

Yealink TR-069 Technote

Topics

Supported RPC Methods

TR-069 Configuration

Supported RPC Methods

The following table provides a description of RPC methods supported by the phones.

RPC Method

Description

GetRPCMethods

This method is used to discover the set of methods supported by the CPE.

SetParameterValues

This method is used to modify the value of one or more CPE parameters.

GetParameterValues

This method is used to obtain the value of one or more CPE parameters.

GetParameterNames

This method is used to discover the parameters accessible on a particular CPE.

GetParameterAttributes This method is used to read the attributes associated with one or more CPE parameters.

SetParameterAttributes This method is used to modify attributes associated with one or more CPE parameters.

Reboot

This method causes the CPE to reboot.

Download

This method is used to cause the CPE to download a specified file from the designated loc-

ation.

File types supported by the phones are:

Firmware Image

Configuration File

Upload

This method is used to cause the CPE to upload a specified file to the designated location.

File types supported by the phones are:

Содержание T5 Series

























































































































































































































































































































































































































































































Результаты поиска

Содержание T5 Series

Отзывы:

Похожие инструкции для T5 Series

Бренды по названию

Популярные бренды

Yealink T5 Series, Руководство администратора

Результаты поиска

Содержание T5 Series

Отзывы:

Похожие инструкции для T5 Series

Бренды по названию

Популярные бренды