Yealink T5 Series Скачать руководство пользователя

Страница: 377 / 472

Advanced Features

371

Supported HTTP/HTTPS GET Request

Supported SIP Notify Message

Variable Values List

Action URI Configuration

Example: Capturing the Current Screen of the Phone

Example: Placing a Call via Web User Interface

Supported HTTP/HTTPS GET Request

Opposite to action URL, action URI allows the phones to interact with web server application by receiving and handling

an HTTP or HTTPS GET request. When receiving a GET request, the phone will perform the specified action and respond

with a 200 OK message.

A GET request may contain a variable named as “key” and a variable value, which are separated by “=”. The valid URI

format is: http(s)://<phoneIPAddress>/servlet?key=variable value. For example: http://10.3.20.10/servlet?key=OK.

Note

Yealink phones are compatible with other two old valid URI formats: http(s)://<phoneIPAddress>/cgi-bin/Con-

figManApp.com?key=variable value and http(s)://<phoneIPAddress>/cgi-bin/cgiServer.exx?key=variable value.

For security reasons, the phones do not handle HTTP/HTTPS GET requests by default. You need to specify the trusted

IP address for action URI. When the IP phone receives a GET request from the trusted IP address for the first time, the

phone screen prompts the message “Allow remote control?”. Tap the

soft key on the phone to allow remote con-

trol. You can specify one or more trusted IP addresses on the IP phone, or configure the IP phone to receive and

handle the URI from any IP address.

Supported SIP Notify Message

In addition, Yealink phones can perform the specified action immediately by accepting a SIP NOTIFY message with the

“Event: ACTION-URI” header from a SIP proxy server. The message body of the SIP NOTIFY message may contain a vari-

able named as “key” and a variable value, which are separated by “=”.

This method is especially useful for users who always work in the small office/home office where a secure firewall may

prevent the HTTP or HTTPS GET request from the external network.

Note

If you want to only accept the SIP NOTIFY message from your SIP server and outbound proxy server, you have to enable the

Accept SIP Trust Server Only feature. For more information, refer to

Accept SIP Trust Server Only

If you use SIP NOTIFY message method, you do not need to specify the trusted IP address for action URI. However, you

should enable the IP phone to receive the action URI requests. When the IP phone receives a SIP NOTIFY message with

the “Event: ACTION-URI” header from a SIP proxy server for the first time, the LCD screen also prompts the message

“Allow remote control?”. Tap the

soft key on the phone to allow remote control.

Example of a SIP Notify with the variable value (OK):

Message Header

NOTIFY sip:[email protected]:5062 SIP/2.0

Via: SIP/2.0/UDP 10.2.40.27:5063;branch=z9hG4bK4163876675

From: <sip:[email protected]>;tag=2900480538

To: "3583" <sip:[email protected]>;tag=490600926

Call-ID: [email protected]

Содержание T5 Series

























































































































































































































































































































































































































































































Результаты поиска

Содержание T5 Series

Отзывы:

Похожие инструкции для T5 Series

Бренды по названию

Популярные бренды

Yealink T5 Series, Руководство администратора

Результаты поиска

Содержание T5 Series

Отзывы:

Похожие инструкции для T5 Series

Бренды по названию

Популярные бренды