Yealink T5 Series Скачать руководство пользователя страница 390

Страница: 390 / 472

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones

384

Note:

It will take effect on all handsets that are registered on the same phone. It works only if “stat-

ic.auto_provision.handset_configured.enable” is set to 1 (Enabled).

Permitted

Values

-Disabled, the backlight will be turned off after the handset is idle for about 10 seconds.

-Enabled, the backlight will be turned off after the handset is idle for about 30 minutes.

Default

Handset UI

OK->Settings->Display->Display Backlight->In Charger

Parameter

custom.handset.backlight_out_of_charger.enable

<y0000000000xx>.cfg

Description

It enables or disables the handset backlight to be on for about 30 minutes when it is not in the charging

state.

Note:

It will take effect on all handsets that are registered on the same phone. It works only if “stat-

ic.auto_provision.handset_configured.enable” is set to 1 (Enabled).

Permitted

Values

-Disabled, the backlight will be turned off after the handset is idle for about 10 seconds.

-Enabled, the backlight will be turned off after the handset is idle for about 30 minutes.

Default

Handset UI

OK->Settings->Display->Display Backlight->Out Of Charger

Handset Keypad Light

You can enable the handset keypad light to make the keypad light up when any key is pressed. This helps you dis-

tinguish keys from each other in a dark environment.

It is only applicable to W56H handsets.

Topic

Handset Keypad Light Configuration

Handset Keypad Light Configuration

The following table lists the parameter you can use to configure the handset keypad light.

Parameter

custom.handset.keypad_light.enable

<y0000000000xx>.cfg

Description

It enables or disables the handset to turn on the keypad light (digital key, # key, * key, TRAN key and

Mute key) when any key is pressed.

Note:

It will take effect on all handsets that are registered on the same phone. It works only if “stat-

ic.auto_provision.handset_configured.enable” is set to 1 (Enabled).

Permitted

Values

-Disabled

-Enabled

Default

Handset UI

OK->Settings->Display->Keypad LED

Handset Wallpaper

Wallpaper is an image used as the background in the handset idle screen. Users can select an image from handset’s

built-in background.

Содержание T5 Series

























































































































































































































































































































































































































































































Результаты поиска

Содержание T5 Series

Отзывы:

Похожие инструкции для T5 Series

Бренды по названию

Популярные бренды

Yealink T5 Series, Руководство администратора

Результаты поиска

Содержание T5 Series

Отзывы:

Похожие инструкции для T5 Series

Бренды по названию

Популярные бренды