Yealink T5 Series, Руководство администратора

Страница: 269 / 472

Call Features
263
activated. You can specify a priority that the incoming paging calls with higher or equal priority are automatically
answered, and the lower ones are ignored.
If it is disabled, all the incoming paging calls will be ignored when DND is activated in phone mode.
Topic
Multicast Paging Settings Configuration
Multicast Paging Settings Configuration
The following table lists the parameters you can use to change multicast paging settings.
Parameter multicast.codec <y0000000000xx>.cfg
Description It configures the codec for multicast paging.
Permitted
Values
PCMU, PCMA, G729, G722
Default G722
Web UI Features->General Information->Multicast Codec
Parameter multicast.receive_priority.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to handle the incoming multicast paging calls when there is an active
multicast paging call on the phone.
Permitted
Values
0 -Disabled, the phone will ignore the incoming multicast paging calls when there is an active multicast
paging call on the phone.
1 -Enabled, the phone will receive the incoming multicast paging call with a higher priority and ignore the
one with a lower priority.
Default 1
Web UI Directory->Multicast IP->Paging Priority Active
Parameter multicast.receive_priority.priority <y0000000000xx>.cfg
Description
It configures the priority of the voice call (a normal phone call rather than a multicast paging call) in pro-
gress.
1 is the highest priority, 31 is the lowest priority.
Permitted
Values
0 -Disabled, all incoming multicast paging calls will be automatically ignored when a voice call is in pro-
gress.
1 -1
2 -2
3 -3
...
31 -31
If it is set to other values, the phone will receive the incoming multicast paging call with a higher or equal
priority and ignore the one with a lower priority when a voice call is in progress.
Default 31