YASKAWA VIPA SLIO SDI, Руководство по эксплуатации

Страница: 51 / 135

Sub-
index
Name Description /
Range of values
Type Bit Offset Access Default
16 Parameter change mode 0: Normal parameter record
set
1: Parameter change F-
address
BOOL 1 77 rw 0
17 Activation
Diagnostic interrupt
0: deactivated
1: activated
Bit is not security relevant.
BOOL 1 78 rw 1
19 Channel 0:
Test pulse length in μs
Condition: Channel 0, 1 acti-
vation on "activated"
Different values selectable
(1ms, 1.5ms, 2ms,
2.5ms, ... ,10ms)
BOOL 16 80 rw 1000
20 Channel 1:
Test pulse length in μs
Condition: Channel 0, 1 acti-
vation on "activated"
Different values selectable
(1ms, 1.5ms, 2ms,
2.5ms, ... ,10ms)
BOOL 16 96 rw 1000
21 Channel 2:
Test pulse length in μs
Condition: Channel 2, 3 acti-
vation on "activated"
Different values selectable
(1ms, 1.5ms, 2ms,
2.5ms, ... ,10ms)
UINT 16 112 rw 1000
22 Channel 3:
Test pulse length in μs
Condition: Channel 2, 3 acti-
vation on "activated"
Different values selectable
(1ms, 1.5ms, 2ms,
2.5ms, ... ,10ms)
UINT 16 128 rw 1000
1) Deactivation of channel groups deviates from "normal operation" and represents a potentially dangerous condition.
The version identifier is specific to a module type, i.e. for the input module and the output
module. Since these have different parameter data, in each case with version 0x0001 is
started.
In the MX file, the identifier 0x0000 is entered so that the firmware can
recognize that this is an invalid parametrization. The safety IO module
must not start up with the default values stored in the MX file.
Unique module identifier, which is also used e.g. in the ESI file.
For a valid parametrization this parameter must be set to 0 (default value). If the F-
address is to be changed for a System SLIO safety module, you can delete the F-address
in the memory of the System SLIO safety module by setting this parameter. Ä Chap. 3.3
‘Setting the F-address’ page 71
Version identifier of the
parametrization data
structure
Module type identifier
Parameter change mode
VIPA System SLIO
Product description
SDO 4xDC 24V 0.5A - FSoE Parameter record set > FSoE application parameters
HB300 | SM-S | 02x-1SD10 | en | 20-02 51