YASKAWA SPEED7 300S+ CPU 315PN, Руководство пользователя

Страница: 120 / 209

9 Deployment Ethernet communication - PROFINET
9.1 Basics PROFINET
n PROFINET is an open Industrial Ethernet Standard from PROFIBUS & PROFINET
International (PI) for automation. PROFINET is standardized in the IEC 61158.
n PROFINET uses TCP/IP and IT standards and supplements the PROFIBUS tech-
nology for applications, where fast data communication with industrial IT functions is
demanded.
There are 2 PROFINET function classes:
n PROFINET IO
n PROFINET CBA
These may be realized in 3 performance steps:
n TCP/IP communication
n RT communication
n IRT communication
n With PROFINET IO an I/O data sight to the distributed periphery is described.
PROFINET IO describes the whole data transfer between IO controller and IO device.
PROFINET is configured like PROFIBUS.
n PROFINET IO always contains the real time concept.
n Contrary to the master-slave procedure of PROFIBUS, PROFINET uses the provider-
consumer model. This supports the communication relations (AR = Application Rela-
tion) between equal participants in the Ethernet. Here the provider sends its data
without a request of the communication partner. Apart from the user data exchange
also functions for parametrization and diagnostics are supported.
n PROFINET CBA means C omponent B ased A utomation.
n This component model describes the communication between autonomously working
stations.
n It makes a simple modularization of complex plants possible, by distributed intelli-
gence by means of graphic configuration for communication of intelligent modules.
This is the open communication via Ethernet TCP/IP without any demand on real-time.
RT means Real-Time. The RT communication represents the basics for data transfer at
PROFINET IO. Here RT data are handled with higher priority.
IRT means Isochronous Real-Time. With the IRT communication the bus cycle begins
clock-exactly i.e. with a maximum permissible tolerance and is again synchronized.
Thereby the time-controlled and synchronous transfer of data is guaranteed. Here sync
telegrams of a sync master in the network serve for.
PROFINET of IEC 61158 has the following properties:
n Full-duplex transfer with 100MBit/s via copper respectively fibre optics.
n Switched Ethernet
n Auto negotiation (negotiates the transfer parameters)
n Auto crossover (transmission and receipt lines are crossed automatically if neces-
sary)
General
PROFINET IO
PROFINET CBA
TCP/IP Communication
RT Communication
IRT Communication
Properties of PROFINET
System 300S +
Deployment Ethernet communication - PROFINET
Basics PROFINET
HB140 | CPU | 315-4PN23 | en | 18-02 120