YASKAWA SPEED7 300S+ CPU 315PN, Руководство пользователя

Страница: 28 / 209

RN
(RUN)
green
ER
(ERR)
red
DE
green
IF
red
Meaning
2Hz 2Hz
Alternate blinking at configuration faults.
Slave exchanges data with the master.
MT (Maintenance)
yellow
BF (Bus error)
red
Meaning
X
n Bus error, no connection to sub net/switch
n wrong transfer rate
n Full-duplex-transmission is not activated
X
2Hz
n Failure of a connected IO device
n At least one IO device is not access-able
n Faulty configuration
X Maintenance event is pending.
4Hz 4Hz
The alternate blinking indicates that a firmware update of the
PROFINET IO controller is executed.
Firmware update of the PROFINET IO controller is finished
without error.
2Hz
X With a suited configuration tool you can cause the MT LED to
blink by means of the function ‘Member blink test’ . This can be
useful for e.g. identification of the module.
not relevant: X
L/A (Link/Activity)
green
S (Speed)
green
Meaning
X The PROFINET IO controller is physically connected to the
Ethernet interface.
X There is no physical connection.
flickers
X Shows Ethernet activity of the PROFINET IO controller.
The Ethernet interface of the PROFINET IO controller has a
transfer rate of 100Mbit.
The Ethernet interface of the PROFINET IO controller has a
transfer rate of 10Mbit.
not relevant: X
LEDs PROFINET IO con-
troller X8
System 300S +
Hardware description
Structure > LEDs
HB140 | CPU | 315-4PN23 | en | 18-02 28