User Constant Settings and Functions
5.2.7 Using Torque Control
5 -38
Pn000.1
Control Method
9
Speed Control: When /P-CON (/C-SEL) is ON
Set the user constant Pn002.0 as shown below.
User Constant
Pn002.0
Torque Reference
Input
(T-REF) (CN1-9,10)
Contents
Remarks
0
--
Normal speed control
1
Torque limit input
Torque limit speed con-
trol by analog voltage
reference
See 5.2.10 for more de-
tails on torque limit
speed control by analog
voltage reference.
2
Torque feed-forward in-
put
Speed control with
torque feed-forward
See 5.2.8 for more de-
tails on torque feed-for-
ward speed control.
8
Position Control
$
Torque Control
Can be used to switch between speed (contact reference) and torque control.
S
/P-CON (/C-SEL)(CN1-41) is used to switch control.
CN1-41 is open.
Position control
CN1-41 is 0 V.
Torque control
Position Control When /P-CON (/C-SEL) is OFF
Set the user constant Pn002.0 as shown below.
User Constant
Pn002.0
Torque Reference
Input
(T-REF) (CN1-9,10)
Contents
Remarks
0
--
Normal position control
1
Torque limit input
Torque limit position
control by analog volt-
age reference
See 5.2.10 for more de-
tails on torque limit
position control by ana-
log voltage reference.
2
Torque feed-forward in-
put
Position control with
torque feed-forward
See 5.2.8 for more de-
tails on torque feed-for-
ward position control.
6
Speed Control (Contact Reference)
$
Torque Control
Can be used to switch between speed (contact reference) and torque control.
S
/P-CON (/C-SEL)(CN1-45) and /N-CL(SPD-B)(CN1-46) are used to switch control.
/P-CL (/SPD-A)
CN1-45
/N-CL (/SPD-B)
CN1-46
--
0: OFF
1: ON
0
0
Torque control
1: ON
0
1
Speed control
1
1
Speed control
(Contact reference)
1
0
(Contact reference)
Note
Input signal /C-SEL can be used only when a signal is allocated to the input circuit. See
5.3.3 Input Circuit
Signal Allocation
.
5
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]