Yardworks 060-0608-2 Скачать руководство пользователя | Manualshive

Страница: 80 / 80

background image

3i. Any CPE Authorized and approved emission-related replacement part may be used in the performance of

any ECS Warranty maintenance or repair and will be provided without charge to the owner. Such use shall
not reduce CPE’s warranty obligation.

3j. Unapproved add-on or modified parts may not be used to modify or repair a CPE engine. Such use voids

this ECS Warranty and shall be sufficient grounds for disallowing an ECS Warranty claim. CPE shall not
be liable hereunder for failures of any warranted parts of a CPE engine caused by the use of such an
unapproved add-on or modified part.

EMISSION-RELATED PARTS INCLUDE THE FOLLOWING:
(using those portions of the list applicable to the engine)

Systems covered by

this warranty

Parts Description

Fuel Metering System

Fuel regulator, Carburetor and internal parts

Air Induction System

Air cleaner, Intake manifold

Ignition System

Spark plug and parts, Magneto ignition system

Exhaust System

Exhaust manifold, catalytic converter

Miscellaneous Parts

Tubing, Fittings, Seals, Gaskets, and Clamps associated with these listed systems.

Evaporative Emissions

Fuel Tank, Fuel Cap, Fuel Lines (for liquid fuel and fuel vapors), Fuel Line Fittings,
Clamps, Pressure Relief Valves, Control Valves, Control Solenoids, Electronic Controls,
Vacuum Control Diaphragms, Control Cables, Control Linkages, Purge Valves, Gaskets,
Liquid/Vapor Separator, Carbon Canister, Canister Mounting Brackets, Carburetor
Purge Port Connector

TO OBTAIN WARRANTY SERVICE:

You must take your CPE engine or the product on which it is installed, along with your warranty registration card or
other proof of original purchase date, at your expense, to any Champion Power Equipment dealer who is authorized
by Champion Power Equipment, Inc. to sell and service that CPE product during his normal business hours. Alternate
service locations defined in Section (3)(f.) above must be approved by CPE prior to service. Claims for repair or
adjustment found to be caused solely by defects in material or workmanship will not be denied because the engine
was not properly maintained and used.

If you have any questions regarding your warranty rights and responsibilities, or to obtain warranty service,
please write or call Customer Service at Champion Power Equipment, Inc.

Champion Power Equipment, Inc.

12039 Smith Ave.

Santa Fe Springs, CA 90670

1-877-338-0999

Attn.: Customer Service

[email protected]

«
...
78
79
80

Содержание 060-0608-2

















































































Отзывы:

Нет отзывов

Похожие инструкции для 060-0608-2

Бренд: Elektror Страницы: 56

Бренд: ebm-papst Страницы: 11

Бренд: Ryobi Страницы: 24

Allied Binary Series

Бренд: Farm King Страницы: 100

Бренд: Hidrotermal Страницы: 4

Бренд: Cub Cadet Страницы: 20

Бренд: Nilfisk-Advance Страницы: 100

Бренд: Cub Cadet Страницы: 28

Бренд: Cub Cadet Страницы: 32

Бренд: Worx Страницы: 28

Бренд: Fruitland Страницы: 20

Бренд: Toro Страницы: 28

Бренд: Toro Страницы: 32

Бренд: Toro Страницы: 28

Poulan Pro 545164393

Бренд: Poulan Pro Страницы: 3

Бренд: New Holland Страницы: 1

Бренд: McCulloch Страницы: 12

Бренд: Premier Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды