Yardworks 060-0608-2 Скачать руководство пользователя | Manualshive

Страница: 78 / 80

background image

Your Champion Power Equipment (CPE) engine complies with U.S. EPA emissions regulations.

YOUR WARRANTY RIGHTS AND OBLIGATIONS:

The US EPA and CPE are pleased to explain the Federal Emission Control Systems Warranty on your 2023 small
off-road engine (SORE) and engine powered equipment. New engines and equipment must be designed, built and
equipped, at the time of sale, to meet U.S. EPA regulations for small off-road engines (SORE). CPE warrants the
emission control system on your small off-road engine (SORE) and equipment for the period of time listed below,
provided there has been no abuse, neglect, unapproved modification, or improper maintenance of your equipment.

Your emission control system may include parts such as the carburetor, fuel-injection system, the ignition system,
catalytic converter and fuel lines. Also included may be hoses, belts, connectors and other emission related
assemblies. Where a warrantable condition exits, CPE will repair your small off-road engine (SORE) at no cost to you
including diagnosis, parts and labor.

MANUFACTURER’S EMISSION CONTROL SYSTEM WARRANTY COVERAGE:

This emission control system is warranted for two years, subject to provisions set forth below. If, during the warranty
period, an emission related part on your engine is defective in materials or workmanship, the part will be repaired or
replaced by CPE.

OWNER WARRANTY RESPONSIBILITIES:

As the small off-road engine (SORE) owner, you are responsible for the performance of the required maintenance
listed in your Owner’s Manual. CPE recommends that you retain all your receipts covering maintenance on your
small off-road engine, but CPE cannot deny warranty solely for the lack of receipts or for your failure to ensure the
performance of all scheduled maintenance.

As the small off-road engine (SORE) owner, you should however be aware that CPE may deny you warranty coverage
if your small, off-road engine (SORE) or a part has failed due to abuse, neglect, improper maintenance or unapproved
modifications.

You are responsible for presenting your small off-road engine (SORE) to an Authorized CPE service outlet or alternate
service outlet as described in (3)(f.) below, CPE dealer or CPE, Santa Fe Springs, Ca. as soon as a problem exists. The
warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days.

If you have any questions regarding your warranty rights and responsibilities, you should contact:

Champion Power Equipment, Inc.

Customer Service
12039 Smith Ave.

Santa Fe Springs, CA 90670

1-877-338-0999

[email protected]

CHAMPION POWER EQUIPMENT, INC. (CPE)

AND UNITED STATES ENVIRONMENT PROTECTION AGENCY (U.S. EPA)

EMISSION CONTROL SYSTEM WARRANTY

«
...
76
77
78
79
80
»

Содержание 060-0608-2

















































































Отзывы:

Нет отзывов

Похожие инструкции для 060-0608-2

Бренд: Echo Страницы: 54

Бренд: Echo Страницы: 32

Бренд: Echo Страницы: 24

Бренд: Echo Страницы: 8

Бренд: Echo Страницы: 5

Бренд: Echo Страницы: 24

Pro Attachment ES-210

Бренд: Echo Страницы: 27

Бренд: Echo Страницы: 28

Бренд: Simplicity Страницы: 24

Бренд: Viking Страницы: 16

AIRDROP P Series

Бренд: Unigreen Страницы: 32

Бренд: Performance Tool Страницы: 8

Бренд: Worx Страницы: 24

Бренд: ST. SpA Страницы: 31

Mini Snow Blade

Бренд: Erskine Attachments Страницы: 20

Бренд: GHP Group Страницы: 12

Бренд: Power smart Страницы: 19

Бренд: Allied Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды