model no.
060-0608-2
| contact us: 1.866.523.5218
model no.
060-0608-2
| contact us: 1.866.523.5218
57
MAINT
eNANC
e
4. Unhook the connector (C) in the
control handle. You may have to move
the control handle to make this easier
to remove. (Fig. 56)
C
Figure 56
5. Remove the auger plate (D) as shown
on the front of the engine by removing
two M6 × 12 bolts (E). (Fig. 57)
e
D
Figure 57
6. Unhook the spring (F) from the auger
plate (G). (Fig. 58)
7. Perform the steps in reverse with the
new cable.
f
G
Figure 58
