Yardworks 060-0608-2 Скачать руководство пользователя

Страница: 3 / 80

model no.

060-0608-2

| contact us: 1.866.523.5218

model no.

060-0608-2

| contact us: 1.866.523.5218

INS

TRUC

TIONS

SAfeTy DefINITIONS
The purpose of safety symbols is to attract

your attention to possible dangers. The

safety symbols, and their explanations,

deserve your careful attention and

understanding. The safety warnings do not

by themselves eliminate any danger. The

instructions or warnings they give are not

substitutes for proper accident prevention

measures.



DANGeR

DANGER indicates a hazardous situation
which, if not avoided, will result in death or
serious injury.



WARNING

WARNING indicates a hazardous situation
which, if not avoided, could result in death or
serious injury.



CAUTION

CAUTION indicates a hazardous situation
which, if not avoided, could result in minor or
moderate injury.



NOTICe

NOTICE indicates information considered
important, but not hazard-related (e.g.,
messages relating to property damage).

GeNeRAl SAfeTy
1. Read the operator's manual carefully.

Be thoroughly familiar with the controls

and the proper use of the equipment.

Know how to stop the unit and

disengage the controls quickly.

2. Never allow children under 16 years

old to operate the equipment. Never

allow adults to operate the equipment

without proper instruction.

3. Thrown objects can cause serious

injury. Keep the area of operation

clear of all persons, particularly small

children, and pets. Plan your snow

discharge pattern to prevent throwing

material toward cars, structures, roads

and people.

4. Exercise caution to avoid slipping or

falling, especially when operating in

reverse.

5. Be aware that the operator or user is

responsible for accidents or hazards

occurring to other people or their

property.

6. Never use the snowblower under the

influence of alcohol, medication, or

recreational drugs, or if you are tired

or ill.

Содержание 060-0608-2

















































































Результаты поиска

Содержание 060-0608-2

Отзывы:

Похожие инструкции для 060-0608-2

Бренды по названию

Популярные бренды

Yardworks 060-0608-2, Руководство оператора

Результаты поиска

Содержание 060-0608-2

Отзывы:

Похожие инструкции для 060-0608-2

Бренды по названию

Популярные бренды