Yardworks 060-0608-2 Скачать руководство пользователя

Страница: 76 / 80

model no.

060-0608-2

| contact us: 1.866.523.5218

ARRANT

model no.

060-0608-2

| contact us: 1.866.523.5218

4-yeAR lIMITeD WARRANTy
For Four YEARS from the date of purchase within Canada, YARDWORKS CANADA will, at

its option, repair or replace for the original purchaser, free of charge, any part or parts found

to be defective in material or workmanship.

THIS WARRANTy DOeS NOT COVeR:
1. Any part that has become inoperative due to misuse, commercial use, abuse, neglect,

accident, improper maintenance, or alteration;

2. The unit, if it has not been operated and/or maintained in accordance with the owner’s

manual;

3.  Normal wear parts like belts, skid shoes and shave plates except as noted below;
4.  Routine maintenance items such as oil, spark plug, fuel line; or
5.  Normal deterioration of the exterior finish due to use or exposure.

fUll 270-DAy WARRANTy ON NORMAl WeAR PARTS:
Normal wear parts are defined as wheels, tires, belts, drive disc, skid shoes and shave

plate. These parts are warranted to the original purchaser to be free from defects in

material and workmanship for a period of two hundred seventy (270) days from the date of

retail purchase.

HOW TO ObTAIN SeRVICe:
Warranty service is available by calling the toll-free helpline at 1.866.523.5218.

The factory will not accept the return of a complete unit unless prior written permission has

been extended by YARDWORKS CANADA.

TRANSPORTATION CHARGeS:
Transportation charges for the movement of the snowblower or accessories are the

responsibility of the purchaser. The purchaser must pay transportation charges for any part

submitted for replacement under this warranty unless such return is requested in writing by

YARDWORKS CANADA.

OTHeR WARRANTIeS:
All other warranties, express or implied, including any implied warranty of merchantability

is limited in its duration to that set forth in this express limited warranty. The provisions as

set forth in this warranty provide the sole and exclusive remedy of YARDWORKS CANADA

obligations arising from the sale of its products.

WARRANTy

Содержание 060-0608-2

















































































Результаты поиска

Содержание 060-0608-2

Отзывы:

Похожие инструкции для 060-0608-2

Бренды по названию

Популярные бренды

Yardworks 060-0608-2, Руководство оператора

Результаты поиска

Содержание 060-0608-2

Отзывы:

Похожие инструкции для 060-0608-2

Бренды по названию

Популярные бренды