model no.
060-0608-2
| contact us: 1.866.523.5218
model no.
060-0608-2
| contact us: 1.866.523.5218
7
S
A
fe
Ty
INS
TRUC
TIONS
13. Never operate the machine at high transport speeds on slippery surfaces. Use care
when reversing.
14. Never direct discharge at bystanders or allow anyone in front of the unit.
15. Disengage power to the impeller when snowblower is transported or not in use.
16. Use only attachments and accessories approved by the manufacturer of snowblower.
17. Never operate the snowblower without good visibility or light. Always be sure of your
footing, and keep a firm hold on the handles. Walk; never run.
18. Take all possible precautions when leaving the machine unattended. Stop the engine
and remove the safety key.
19. Keep all nuts, bolts and screws tight to be sure the equipment is in safe working
condition.
20. Replace worn or damaged parts for safety. Use only genuine replacement parts and
accessories.
21. This snowblower is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
22. Be careful while working on the machine or clearing a blockage in the auger or impeller
to ensure that fingers and hands do not become crushed or cut.
23. Do not touch hot engine components like the muffler, muffler guard or engine block
during operation of the snowblower as they will cause burns.
24. Should the unit stop discharging snow for any reason, release the controls to stop
and inspect for any lodged items or damaged parts in the auger housing. Reference
"Troubleshooting" section for causes and solutions.
WARNING: Replace worn or damaged parts for safety. Use only genuine
replacement parts and accessories.
