model no.
060-0608-2
| contact us: 1.866.523.5218
52
MAINT
eNANC
e
4. Rotate the lower nut (C) clockwise
to move the nut upwards toward the
bracket to remove cable slack. Stop
turning the nut when you feel the
cable is engaged against the return
spring, and just before the deflector
starts moving down. If the deflector
moves down a bit, then turn the lower
nut counterclockwise away from the
bracket to engage the spring, without
moving the deflector downwards.
(Fig. 47)
C
Figure 47
5. Rotate the upper nut (D) clockwise to
move the nut downwards against the
bracket. Tighten these two nuts until
snug. (Fig. 48)
6. Slide the rubber boot back to cover the
end of the cable sheath.
7. Test the deflector to verify that you
have full travel, from near vertical to
fully down.
D
Figure 48
