Yanmar B95W Скачать руководство пользователя страница 245

Страница: 245 / 310

B95W

Operation

07_Bedienung_en.fm - V1.0 - 1.8.17

Actuation of oscillating axle lock

The oscillating axle lock is controlled by the excavator brake; that is, upon
engaging the brake, the oscillating axle is automatically locked.

For special application cases, it is possible to activate the oscillating axle locking
independent of the excavator brake.

Turn on the oscillating axle lock.

The indicator light in the switch lights up red.

Bucket change-over with fork carrier fitted (optional)

Switch on the bucket changeover on the display in the machine functions
sub-menu.

Joystick right

Tab. 7-7 Bucket change-over with fork carrier fitted

Notice

Before locking the oscillation axle, stabilize the machine using the supports.

Notice

After completing the special work, set switch for oscillating axle locking
immediately back to “OFF”.

Position/actuation

Effect

to the left

Tilt fork carrier back

to the right

Tilt fork carrier forward.

Содержание B95W























































































































































































































































































































Результаты поиска

Содержание B95W

Отзывы:

Похожие инструкции для B95W

Бренды по названию

Популярные бренды

Yanmar B95W, Руководство по эксплуатации

Результаты поиска

Содержание B95W

Отзывы:

Похожие инструкции для B95W

Бренды по названию

Популярные бренды