Yanmar B95W, Руководство по эксплуатации

Страница: 14 / 310

B95W
Introduction
12 / 306
2
02_Einleitung_en.fm - V1.0 - 1.8.17
10
2.3 Proper use
The Yanmar machine with standard fittings is solely intended for the following
type of work:
• Loosening, picking up, displacement and dumping of soil, rock or other
materials.
• Loading of these materials on trucks, conveyor belts or other haulage means.
After mounting additional approved special work attachments, such as:
• Clamshell grabs
• Hydraulic hammer
• etc.
the vehicle can be used for corresponding working operations.
The machine can also be used for lifting, transporting, and lowering loads with
the aid of sling gear.
The machine must be licensed for the road if it is to be used on public roads, in
line with local traffic and vehicle regulations. In this case, it is subject to labeling
as per § 58 of the StVZO (National Road Traffic Regulations) and, if required,
as per § 4 paragraph 4 of the FZV (as above). Any changes made to the machine
will invalidate the vehicle's road license.
The machine is only permitted on public roads with a specific or general operating
permit to this end.
Strict compliance with the operating and maintenance instructions and the
performance of maintenance work, as well as adherence to the maintenance
intervals is also part of intended use. The operator must also follow the enclosed
operating instructions for externally supplied components.
The permissible operation temperature is between -15 °C and +48 °C.
2.4 Improper use
Using the Yanmar machine for the following types of work is deemed to
constitute unintended use:
• Transport of persons
• Lifting persons
• Using the machine at fording depth higher than the lower edge of the axle.
• Transporting cargo on public roads
• Use in water protection areas
• Operating on public roads
• Use in a contaminated area without a protective ventilation system in the cab or a
breathing air supply for the machine operator
Also, all types of use other than those described in section “Proper use” are
improper.
The supplier cannot be held responsible for any damage resulting from improper
use. This risk is borne solely by the user.