Yanmar B95W Скачать руководство пользователя страница 158

Страница: 158 / 310

B95W

Maintenance

156 / 306

06_Wartung und Pflege_en.fm - V1.0 - 1.8.17

Changing the fuel filter

Fig. 6-18 Changing the fuel filter

Fuel change filter

Clean the fuel filter on the outside.

Unscrew the filter cartridge (1).

Collect the fuel according to regulations.

Dispose of the filter cartridge according to regulations.

Clean the sealing surface of the filter holder with a clean lint-free cloth.

Lightly oil the seal of the new filter.

Screw the new filter on by hand until the seal is in place.

CAUTION

Danger of engine damage

The fuel system is very sensitive and can be damaged by
dirt.

Prime the new filter with fuel.

CAUTION

Danger posed by environmentally hazardous
substances

There is a risk of fuel being discharged into the
environment and causing considerable environmental
damage.

Do not allow fuel to seep into the ground.

Place a suitable receptacle for the collection of fuel
underneath the working area.

Collect fuel and dispose of it according to regulations!

Содержание B95W























































































































































































































































































































Результаты поиска

Содержание B95W

Отзывы:

Похожие инструкции для B95W

Бренды по названию

Популярные бренды

Yanmar B95W, Руководство по эксплуатации

Результаты поиска

Содержание B95W

Отзывы:

Похожие инструкции для B95W

Бренды по названию

Популярные бренды