background image

5-43

CHAS

HANDLEBAR

2. Install:

9

Grip cap (upper) 

1

9

Grip cap (lower) 

2

9

Bolt (grip cap) 

3

NOTE:

Temporarily tighten the bolts (grip cap).

EC5B5210

Handlebar

1. Install:

9

Handlebar 

1

9

Handlebar holder 

2

9

Bolt (handlebar holder) 

3

NOTE:

9

The upper handlebar holder should be

installed with the punched mark 

a

forward.

9

First tighten the bolts on the front side of the

handlebar holder, and then tighten the bolts on
the rear side.

2. Install:

9

Grip (left) 

1

Apply the adhesive to the handlebar 

2

.

NOTE:

9

Before applying the adhesive, wipe off grease

or oil on the handlebar surface 

a

with a lac-

quer thinner.

9

Install the grip (left) to the handlebar so that

the line 

b

between the two arrow marks faces

straight upward.

3. Install:

9

Collar 

1

9

Cap cover 

2

9

Throttle 

3

NOTE:

9

Apply the lithium soap base grease on the

throttle grip sliding surface.

9

Tighten the grip cap bolts temporarily without

the throttle being fixed to the handlebar.

28 Nm (2.8 m•kg, 20 ft•lb)

5NY-9-30-5C  5/23/01 9:10 PM  Page 8

Содержание YZ125(P)/LC





















































































































































































































































































































































































































































































































































































Отзывы: