background image

4-59

ENG

ENGINE REMOVAL

EC4M3000

REMOVAL POINTS

EC4F3100

Drive sprocket

1. Remove:

9

Nut (drive sprocket) 

1

9

Lock washer 

2

NOTE:

9

Straighten the lock washer tab.

9

Loosen the nut while applying the rear brake.

2. Remove:

9

Drive sprocket 

1

9

Drive chain 

2

NOTE:

Remove the drive sprocket together with the dri-
ve chain.

EC4M3301

Engine removal

1. Remove:

9

Pivot shaft 

1

NOTE:

If the pivot shaft is pulled all the way out, the
swingarm will come loose. If possible, insert a
shaft of similar diameter into the other side of
the swingarm to support it.

2. Remove:

9

Engine 

1

From right side.

NOTE:

Make sure that the couplers, hoses and cables
are disconnected.

5NY-9-30-4D  5/24/01 8:33 PM  Page 6

Содержание YZ125(P)/LC





















































































































































































































































































































































































































































































































































































Отзывы: