For Service Engineers
Service Information
SI1906002E-001=YSP10 installation and adjustment procedures
34/120
Press the [Width] button.
Press the [Width] button at the lower left part of the screen.
Input the line alignment jig width to the [Target Width] box.
Input “170” or “250” in accordance with the line alignment jig to be used.
Press the [OK] button to perform the conveyor width adjustment.
Caution
After setting the conveyor width, DO NOT apply force on the conveyor frame. Otherwise the
conveyor width may change.
Press
Offset line alignment jig
L-shaped line alignment jig or glass frame of board
