For Service Engineers
Service Information
8/120
SI1906002J-002 : YSP10 installation and adjustment procedures
Reassemble JIG PLATE 2 as in the below right figure.
Reinstall the knob of the LINE MEASURE 1 removed in step 1.
Reinstall the knob removed in step 1 to its original position.
Set the jig on the conveyor.
Reassemble JIG PLATE 2
as shown below.
Insert JIG PLATE 2 of LINE MEASURE
1 onto LINE MEASURE 2.
LINE MEASURE 2
LINE MEASURE 1
2
1 Fit the jigs against the
conveyor rail in the direction
of arrows
.
2 While preserving the
condition of
, press the
LINE MEASURE 1.
1
1
Check the conveyor
position offset here.
