manualshive.com logo in svg

Yamaha SY85, Руководство пользователя, Страница: 9 / 424

Поделиться
Скачать
Yamaha SY85 Скачать руководство пользователя страница 9

YAMAHA is not responsible for damage caused by improper handling
or operation.

6

n 

Data Card and Wave Card

•

Never attempt to force a voice card into the waveform slot, or vice versa.
Doing so can cause serious damage to the card connectors.

n 

Service and Modification

•

The SY85 contains no user serviceable parts. Opening it or tampering with
it in anyway can lead to irreparable damage and possibly electric shock.
Refer all servicing to qualified YAMAHA personnel.

n 

Third-party Software

•

Yamaha can not take any responsibility for software produced for this prod-
uct by third-party manufacturers. Please direct any questions or comments
about such software to the manufacturer or their agents.

Содержание SY85









































































































































































































































































































































































































































Отзывы:

Нет отзывов