Yamaha SY85 Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 424

Yamaha SY85 Скачать руководство пользователя страница 57

5.

Enter the Required Notes and Rests

When you’ve selected the required note length, play the note to be entered

on the keyboard. The entered note will appear as a diamond (u) on the step
record input display line. The cursor will move to the beginning of the next

note.

Press the REST key (PROGRAM key [3]) instead of playing a note if you

want to enter a rest of the currently specified length.

6.

Continue Until the Track Is Complete

Repeat steps 3 through 5 until the required material is entered. You can

move the cursor back and forth using the data entry dial, adding notes wherever
you like — even on top of other notes to create chords. The SEQUENCER

and

keys can be used to move backward and forward a measure at a

time.

Erasing Notes

To erase a note, move the cursor to that note and press the [F6] function
key, immediately below “[ERASE]” on the display. The diamond note
marker will disappear. If the diamond marks a chord, the entire chord

will be erased.

Switching Voices Mid-track

You can switch to a different voice anywhere in a track by entering a

program change command at the required point. After moving the cursor
to the point at which you want to change voices in the step record edit
display, press the [F7] function key.

Use [CS4] to select “PFM” if you want to switch to a performance combi-

nation or “VCE” if you want to switch to a voice, select the performance
combination or voice in the normal way, the press [F8] (under “[GO]” on the
display) to enter the specified program change (or [EXIT] to quit and return
directly to the step-record display). The display will return to the step record
edit display, and a “p” will occur at the point at which the program change
command was. entered. Program change commands can be erased in the same

was as notes by using the [ERASE] key.

54

5. The Sequencer

«
...
55
56
57
58
59
...
»

Содержание SY85









































































































































































































































































































































































































































Отзывы:

Нет отзывов