manualshive.com logo in svg

Yamaha SY85, Руководство пользователя, Страница: 55 / 424

Поделиться
Скачать
Yamaha SY85 Скачать руководство пользователя страница 55

7.

Record the Next Part

When you’re satisfied that the first track is OK, go back to step 3-2 and

select a new record track, then record. Continue this process until your compo-
sition is complete. For difficult tracks you might want to use the step record
mode, described below.

Step Recording (Tracks 1 ... 8)

Step recording allows you to input parts note by note, rest by rest, without

having to actually play the part on the keyboard. This is ideal for entering
difficult parts from written music, or for extremely complex or fast passages
that would be impossible to play in real time.

1. 

Select the “Step” Record Mode

The sequencer record mode is entered in the same was as described in the

“REALTIME RECORDING” section, above. Instead of choosing the “repl” or
“over” record mode, select “step.” You can also select a time signature at this
point if nothing has been recorded yet.

2. 

Press [RUN]

Press the [RUN] key to call the step record display.

52

5. The Sequencer

Содержание SY85









































































































































































































































































































































































































































Отзывы:

Нет отзывов