manualshive.com logo in svg

Yamaha SY85, Руководство пользователя, Страница: 52 / 424

Поделиться
Скачать
Yamaha SY85 Скачать руководство пользователя страница 52

3. 

Return to the SONG Mode and Set the Record Parameters

Engage the Record Mode.

Press [SONG] or [EXIT] to return to the song play mode, then press the

sequencer [RECORD] key to engage the record standby mode. The red
[RECORD] indicator will light.

Select the Record Track.

GROUP keys [A] through [H] correspond to sequencer tracks 1 through

8, while PROGRAM key [1] is used to select the rhythm track (the rhythm
track will be described in detail in “Rhythm Patterns and the Rhythm
Track”). When the song mode is engaged, the indicators corresponding to
tracks that already contain some recorded data glow green. The inidcator of

the track to be recorded, selected by pressing the appropriate GROUP or
PROGRAM key, glows red.

When the desired record track is selected, the corresponding instrument

in the current multi-play setup will sound when the keyboard is played.

Select a Record Mode.

Use [CS1] to select the desired record mode. The different record modes

are:

OVER 

(Real-time Overdub)

Material recorded in the overdub mode is recorded “over” any previous
material, so you end up with a combination of the previous and newly-
recorded data.

REPL 

(Real-time Replace)

Anything recorded in this mode replaces previously recorded material.
That is, previous data on the current track is erased and replaced by the
new material.

5. The Sequencer

49

Содержание SY85









































































































































































































































































































































































































































Отзывы:

Нет отзывов