Yamaha SY85 Скачать руководство пользователя страница 392

Страница: 392 / 424

Disk

COMMENTS

The disk is not correctly inserted into the disk drive.

During the backup operation, the original and backup disks were
inserted in the wrong order.

The data in the disk is faulty.

The disk is faulty.

The file was not found, or you attempted to load a file that does

not have a legal MS-DOS file name.

The disk is write protected.

There is no more memory available on the disk.

The disk is the wrong type.

The file is not for the SY85.

Sequencer

DISPLAY COMMENTS

The sequencer cannot play during disk or card loading/saving or
during bulk data transmission.

Rhythm track search was performed on a track which contains
no mark.

More sequence data was played back than could be sounded.

You have attempted to perform a song job on a measure that
contains no data.

The sequencer’s internal memory is full. Execution of song jobs,
bulk reception, and loading from disks is not possible.

Battery

DISPLAY

The internal backup battery needs to be replaced.

The card backup battery needs to be replaced.

APPENDIX

/ ERROR MESSAGES

321

Содержание SY85









































































































































































































































































































































































































































Результаты поиска

Содержание SY85

Отзывы:

Yamaha SY85, Руководство пользователя, Страница: 392 / 424

Результаты поиска

Содержание SY85

Отзывы: