manualshive.com logo in svg

Yamaha SY85, Руководство пользователя, Страница: 303 / 424

Поделиться
Скачать
Yamaha SY85 Скачать руководство пользователя страница 303

7: RENAME/DELETE

These utilities allow disk files to be renamed or deleted.

Press the [Fl] key to highlight “REN” on the display if you want to rename

a file, or press the [F2] key to highlight “DEL” on the display if you want to

delete a file. Next, use [CS6] to select the type of data file you want to rename
or delete (“l:All,Sy,Seq” for all synthesizer and sequencer files, “NSEQ” for
NSEQ format files, “Other” for standard MIDI format files, and “MDR” for
MDR files). Use [CS5] to select the number of the disk file (01 through 99)
that you want to load from or save to. Only files that have the selected file
type will show a file name above the file number.

If you selected “REN”, enter the file name with the group and program

keys as in “Voice Name” (see page 95), then press [ENTER/YES] to begin the
rename procedure. If you selected “DEL”, simply press [ENTER/YES] to begin
the delete procedure. The following confirmation display will appear:

Press [ENTER/YES] again to confirm that you want to go ahead with the

file rename or delete operation, or press [EXIT/NO] to cancel.

When the file has been renamed or deleted, “Completed!” will appear

briefly on the display.

See page 321 for information on disk error messages.

UTILITY MODE / 

DISK 

231

Содержание SY85









































































































































































































































































































































































































































Отзывы:

Нет отзывов