manualshive.com logo in svg

Yamaha SY85, Руководство пользователя, Страница: 282 / 424

Поделиться
Скачать
Yamaha SY85 Скачать руководство пользователя страница 282

1: SYSTEM

This screen includes several parameters that affect overall operation of the SY85.

NtShft (Note shift)

Range: -63 ... +63
Controls: [CS4], [-1] [+1], Dial,

Shifts the overall pitch of the SY85 up or down in semitone steps.
A setting of “-12,” for example, shifts the pitch down by one octave; a

setting of “+4” shifts the pitch up by a major third.

Tune (Master tuning)

Range: -63 ... +63
Controls: [CS5], [-1] [+1], Dial,

Fine tunes the overall pitch of the SY85 in approximately 1.17-cent steps (a

“cent” is 1/100th of a semitone).

The maximum minus setting of “-63” produces a downward pitch shift of

almost three-quarters of a semitone, and the maximum plus setting of “+63”
produces an upward pitch shift of the same amount. A setting of “0” produces
no pitch change.

CtrlRst (Control reset)

Range: off, on
Controls: [CS7], [-1] [+1], Dial

Determines whether controller settings (modulation wheel, pitch bend,

breath controller, foot controller, etc.) are held (“off”) or reset (“on”) when
voices or multi-play setups are switched.

If this function is set to “off,” then if, for example, you have applied modu-

lation to a voice via the modulation wheel and switch to a new voice while
maintaining the same modulation wheel position, then the same amount of
modulation will be applied to the new voice. If “on” is selected, than all con-
troller values are reset when a new voice or multi-play setup is selected.

210 

UTILITY MODE / 

SYNTH SETUP

Содержание SY85









































































































































































































































































































































































































































Отзывы:

Нет отзывов