manualshive.com logo in svg

Yamaha SY85, Руководство пользователя, Страница: 261 / 424

Поделиться
Скачать
Yamaha SY85 Скачать руководство пользователя страница 261

7: COPY MEASURE

Copies a specified measure or range of measures from one track to the specified

measure in another track.

This job is not available when the rhythm track (track 9) is selected.

From Meas (Source measure range, track, copy count)

Range: Measures: 001 ... 999. Track: TR1 ... TR8. Count: 1x ... 99x

Controls: [CS3] ... [CS6], [-1] [+1], Dial

To Meas (Destination track & measure)

Range: Track: TR1 ... TR8. Measure: 001 ... 999.
Controls: [CS7], [CS8], [-1] [+1], Dial

Use [CS4] to specify the track from which the data is to be copied, [CS5]

and [CS6] to select the first and last measures of the range to be copied, and

[CS3] to specify the number of times the selected data is to be copied. Use
[CS7] to specify the destination track, and [CS8] to specify the destination

measure.

Press [ENTER/YES] to begin the copy procedure. The following confirma-

tion display will appear:

188

Press [ENTER/YES] again to confirm that you want to go ahead with the

copy operation (which will overwrite data in the destination track), or press

[EXIT/NO] to cancel.

When the data has been copied, “Completed!” will appear briefly on the

display.

A copy operation overwrites the data from the beginning of the specified

destination measure with the data from the source measure(s). Previous data in
the overwritten measures is therefore lost.

SONG EDIT MODE / 

SONG JOB

Содержание SY85









































































































































































































































































































































































































































Отзывы:

Нет отзывов