manualshive.com logo in svg

Yamaha SY85, Руководство пользователя, Страница: 258 / 424

Поделиться
Скачать
Yamaha SY85 Скачать руководство пользователя страница 258

5: DELETE TRACK

Deletes all data from the specified track.
This job is not available when the rhythm track (track 9) is selected.

Use the GROUP [A] through [H] keys to select the track you want to delete

(A = track1, B = track 2, and so on). The LED of the selected track will glow

red while the LEDs of all other tracks containing data glow green. Press [EN-
TER/YES] to begin the delete procedure. The following confirmation display
will appear:

Press [ENTER/YES] again to confirm that you want to go ahead with the

delete operation, or press [EXIT/NO] to cancel.

When the track has been deleted, “Completed!” will appear briefly on the

display.

SONG EDIT MODE / 

SONG JOB 

185

Содержание SY85









































































































































































































































































































































































































































Отзывы:

Нет отзывов