manualshive.com logo in svg

Yamaha SY85, Руководство пользователя, Страница: 271 / 424

Поделиться
Скачать
Yamaha SY85 Скачать руководство пользователя страница 271

15: VELOCITY MODIFY

Increases or decreases the velocity values of all notes in the specified track and

range of measures.

This job is not available when the rhythm track (track 9) is selected.

Meas (First & last measure numbers)

Range: 001 ... 999
Controls: [CS5], [CS6], [-1] [+1], Dial

Rate (Velocity ratio)

Range: 000 ... 200
Controls: [CS7], [-1] [+1], Dial

Ofst (Offset)

Range: -99 ... +99

Controls: [CS8], [-1] [+1], Dial

Use the GROUP [A] through [H] keys to select the track on which the

velocity modify operation is to be performed (A = track1, B = track 2, and so
on). The LED of the selected track will glow red while the LEDs of all other
tracks containing data glow green.

Use [CS5] and [CS6] to specify the first and last measure numbers in the

range of measures over which you want to modify the velocity data. Use [CS7]
to set the “ratio” between the lower and higher velocity values (a setting of
“100%” maintains the original relationship between the notes, lower values
produce a narrower dynamic range, and higher values produce a broader dy-
namic range). Use [CS8] to specify the amount of offset (“-” settings reduce
the velocity while “+” settings increase the velocity).

Press [ENTER/YES] to begin the velocity modify procedure. The following

confirmation display will appear:

Press [ENTER/YES] again to confirm that you want to go ahead with the

velocity modify operation, or press [EXIT/NO] to cancel.

When the velocity data has been modified, “Completed!” will appear briefly

on the display.

198 

SONG EDIT MODE / 

SONG JOB

Содержание SY85









































































































































































































































































































































































































































Отзывы:

Нет отзывов