Data List
17
DIST
DELAY
One input, two output distortion and delay effects in series.
MULTI FILTER
Two input, two output 3-band multi-filter (24 dB/octave).
FREEZE
One input, two output basic sampler.
DISTORTION
One input, two output distortion effect.
Parameter
Range
Description
DST TYPE
DST1, DST2, OVD1,
OVD2, CRUNCH
Distortion type (DST = distortion, OVD = overdrive)
DRIVE
0–100
Distortion drive
MASTER
0–100
Master volume
TONE
–10 to +10
Tone control
N. GATE
0–20
Noise reduction
SYNC
OFF/ON
Tempo parameter sync on/off
DLY.NOTE
*1
*1.
(Maximum value depends on the tempo
setting)
Used in conjunction with TEMPO to determine DELAY
MOD.NOTE
*2
*2.
Used in conjunction with TEMPO to determine FREQ
DELAY
0.0–2725.0 ms
Delay time
FB. GAIN
–99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
HI. RATIO
0.1–1.0
High-frequency feedback ratio
FREQ.
0.05–40.00 Hz
Modulation speed
DEPTH
0–100%
Modulation depth
DLY.BAL
0–100%
Distortion and delay balance
(0% = all distortion, 100% = all delayed distortion)
Parameter
Range
Description
TYPE 1
LPF, HPF, BPF
Filter 1 type: high pass, low pass, band pass
FREQ. 1
28.0 Hz–16.0 kHz
Filter 1 frequency
LEVEL 1
0–100
Filter 1 level
RESO. 1
0–20
Filter 1 resonance
TYPE 2
LPF, HPF, BPF
Filter 2 type: high pass, low pass, band pass
FREQ. 2
28.0 Hz–16.0 kHz
Filter 2 frequency
LEVEL 2
0–100
Filter 2 level
RESO. 2
0–20
Filter 2 resonance
TYPE 3
LPF, HPF, BPF
Filter 3 type: high pass, low pass, band pass
FREQ. 3
28.0 Hz–16.0 kHz
Filter 3 frequency
LEVEL 3
0–100
Filter 3 level
RESO. 3
0–20
Filter 3 resonance
Parameter
Range
Description
REC MODE
MANUAL, INPUT
In MANUAL mode, recording is started by pressing the REC and PLAY
buttons. In INPUT mode, Record-Ready mode is engaged by pressing the
REC button, and actual recording is triggered by the input signal.
REC DLY
–1000 to +1000 ms
Recording delay.
For plus values, recording starts after the trigger is received. For minus
values, recording starts before the trigger is received.
PLY MODE
MOMENT, CONTI.,
INPUT
In MOMENT mode, the sample plays only while the PLAY button is
pressed. In CONT mode, playback continues once the PLAY button has
been pressed. The number of times the sample plays is set using the LOOP
NUM parameter. In INPUT mode, playback is triggered by the input signal.
TRG LVL
–60 to 0 dB
Input trigger level (i.e., the signal level required to trigger recording or
playback)
TRG MASK
0–1000 ms
Once playback has been triggered, subsequent triggers are ignored for the
duration of the TRG MASK time.
START
*1
*1.
0.0
–5
941.0 ms (fs=44.1 kHz), 0.0 ms
–5
458.3 ms (fs=48 kHz)
Playback start point in milliseconds
END
*1
Playback end point in milliseconds
LOOP
*1
Loop start point in milliseconds
LOOP
NUM
0–100
Number of times the sample plays
PITCH
–12 to +12 semitones
Playback pitch shift
FINE
–50 to +50 cents
Playback pitch shift fine
MIDI TRG
OFF, C1–C6, ALL
The PLAY button can be triggered by using MIDI Note on/off messages.
START
[SAMPLE]
0–131000
Playback start point in samples
END
[SAMPLE]
0–131000
Playback end point in samples
LOOP
[SAMPLE]
0–131000
Loop start point in samples
Parameter
Range
Description
DST TYPE
DST1, DST2, OVD1,
OVD2, CRUNCH
Distortion type (DST = distortion, OVD = overdrive)
DRIVE
0–100
Distortion drive
MASTER
0–100
Master volume
TONE
–10 to +10
Tone control
N. GATE
0–20
Noise reduction
