Recorder
Reference Manual
169
Recorder
This chapter explains the functionality and operation of the recorder.
About the USB memory recorder
The QL series console features a USB memory recorder function that lets you easily record
internal audio signals to a USB flash drive, or play back audio files recorded on a USB flash
drive.
As the file format for recording, the QL series console supports MP3 (MPEG-1 Audio Layer-3).
For playback, it supports MP3 as well as WMA (Windows Media Audio) and AAC (MPEG-4
AAC) files. However, DRM (Digital Rights Management) is not supported.
By using the USB memory recorder, the output from the STEREO bus or a MIX bus can be
recorded to a USB flash drive, or background music or sound effects saved on the USB flash
drive can be played back via an assigned input channel.
Signal flow for the USB memory recorder
* QL1: INPUT1-32
NOTE
• Recording and playback cannot be done simultaneously.
• The signal being recorded cannot be input to an INPUT channel.
Assigning channels to the input/output of the
recorder
Follow the steps below to patch the desired channels to the input and output of the USB
memory recorder. You can patch any desired output channel or the direct output of an INPUT
channel to the recorder input, and you can patch the recorder output to any desired input
channel.
NOTE
• The USB memory recorder always records and plays back in stereo. If you want to record in
monaural, with the same signal for left and right, you must assign both of the recorder inputs to
the same channel.
• You can patch multiple channels to the recorder output.
• In steps 4 and 8, if you select a channel to which another port is already patched, a dialog box
will ask you to confirm the patch change. Press the OK button in the dialog box.
• In the case of QL1, channels that do not exist on the model will not be shown.
MIX1-16
MATRIX1-8
STEREO L/R
MONO
INPUT1-64*
DIRECT OUT
RECORDER
INPUT
PLAYBACK
OUT
INPUT1-64*
ST IN 1L1R-8L8R
L
R
L
R
USB memory
recorder
STEP
1.
In the Function Access Area, press the RECORDER button.
2.
Press the USB tab in the RECORDER screen.
3.
Press the RECORDER INPUT L or R button.
4.
Use the category list and the port select buttons in the CH SELECT window to select
the channel that you want to patch to the USB memory recorder input.
5.
When you have finished assigning the channel, press the CLOSE button.
6.
Assign a channel to the other input in the same way.
7.
Press the PLAYBACK OUTPUT L or R button.
8.
Use the category list and the channel select buttons in the CH SELECT window to
select the channel that you want to patch to the USB memory recorder output.
9.
When you have finished assigning the channel, press the CLOSE button.
10.
Assign a channel to the other output in the same way.
RECORDER screen
